For Heating Mode (only for model no. AC-10000H)

The drainage hose may be extended by adding an extension hose using a suitable connector.

PLEASE NOTE:

1.The drain must be at or below the level of the drainage port.

2.The full water tank indicator light will not work when the unit is being continuously drained.

3.To extend the drainage hose, you can connect it with another hose with an overall diameter of 0.7” (18 mm).

4.If room humidity levels are over 85%, it will be necessary to continuously drain the unit using the drainage hose.

FIG.19

Drainage hose included with the unit

FIG.20

Drainage hose included with the unit

Extension hose (OD: 0.7” )

For Heating Mode (only for model no. AC-10000H)

While using the heating function, please note the following:

1.In order to properly exhaust cool air, make sure the exhaust hose and window kit are properly installed (refer to page 4 for instructions).

2.Set up the air conditioner for continuous drainage using the drain tube (refer to page 10 & 11 for instructions).

The working range for the heating function is 32° F to 68°F. The unit may not provide optimal heating if used in temperatures outside this range

11

Page 12
Image 12
NewAir AC-10000E owner manual Please Note, For Heating Mode only for model no. AC-10000H