Newcon Optik NVS 14-3GCS operation manual Swinging head mounted unit for unobstructed view

FIGURE 3

1.	“Swing arm” mount	4.	Unit groove
2.	Grooved pad	5.	Flip button
3.	Locking knob	6.	US clip mount

The unit is attached to the headgear with a swing arm mount (1, Fig. 3). To attach the arm mount to the headgear loosen the tightening screw (8, Fig. 1) on headgear, slide helmet groove (2, Fig. 3) onto the rail, and then tighten the screw.

To attach monocular to the arm turn the knob (3, Fig. 3), slide the arm groove (4, Fig.3) along the dovetail platform of the monocular (10, Fig. 1), and then release the knob.

To set comfortable eye-relief (the distance between your eye and the eyepiece), loosen tightening screw (8, Fig. 1) on the headgear and move the unit, then tighten the locking screw.

To use the unit with PASGT head and helmet mount unscrew the grooved pad (2, Fig. 3) from the swing arm mount and screw on the US type clip (6, Fig. 3) using four screws (Fig. 3) instead. US type helmet clip is optional and must be ordered specially.

To switch between left and right eye, press the flip button (5, Fig. 3) on the mount and rotate it respectively until click.

6.9Swinging head mounted unit for unobstructed view

When the head mounted unit is not in use you can raise it to clear the view without taking the headgear off by using the “flip/flop” feature. To swing the unit from the view press the button (5, Fig. 3) and raise the device until you hear a click.

15