ITEM# MM1007

Equalizer

To get a more pleasing sound, users can adjust the equalizer to follow his/her music style preferences. Users can select rock-and-roll, fashion, field, dance-music, electronic, classic and light-music options.

3D Processing

In the “Tone setup” menu page users can use up/down keys to move cursor and select the

“3D processing setup” option to set up “PRO LOGIC” or “MIX”.

PRO LOGIC II

At the “PRO LOGIC II” option page press “PLAY” to enter into the setting mode. While using up/down keys to operate “ON” and “Auto ON/OFF”. When AUTO ON/OFF is selected two audio channels will be processed to simulate five channels and can be played by multi-channel speakers. If “OFF” the processing is not active.

Mode : the music mode means that all sounds coming from different speakers will arrive without any delay. The video mode means that under circulated channel it will delay for 10ms. The PRO LOGIC mode will simulate PRO LOGIC I processing.

Full screen mode: makes the front stereo sound extend to both sides in order to create better surround effect.

Dimension control: acts similar to the balancing control between the front and rear sounds that can gradually move the front, back and side sound fields. There are seven levels in total that can be adjusted.

Central width: adjusts the center audio channel signal and divides it to both right and left channels.

25

Page 26
Image 26
Nextar MM1007 instruction manual PRO Logic