Nextel comm I730 manual Completing Setup, Joining a Talkgroup

Getting Started

3Press O.

4Scroll to see your information:

•Name — Enter your name. See “Entering Text” on page 33.

•Line 1 and Line 2 — your phone numbers for phone lines 1 and 2. These are filled in when you receive your first Net alert after enabling over-the-air security on your phone.

•Direct Connect — Your Direct Connect number is the number that others use to contact you using Direct Connect service. It is filled in when you receive your first Net alert after enabling over-the-air security on your phone.

•Group ID — the number of the Talkgroup you have joined.

•Carrier IP — the IP address assigned to Nextel. It is filled in when you register for packet data services.

•IP1 Address and IP2 Address — the IP addresses assigned to you for using the Internet with your phone.

•Ckt — Your circuit data number is the number you use if you want to use your phone to transfer circuit data. See “Using Your Phone as a Modem” on page 88. You receive this number from Nextel.

•Service Status — This information may be used by Nextel Customer Care if there is a problem with your phone’s services.

Completing Setup

Joining a Talkgroup

When you enable over-the-air security, you receive a list of Talkgroups that have been set up for you if you subscribe to this service. The Talkgroup list is saved to Contacts.

To receive Group Connect calls made to any of these Talkgroups, you must join the Talkgroup.

1Press A under Contcs. -or-

From the main menu, scroll to Contacts and press O.

2Scroll to the Talkgroup you want to join.

3Press A under Join.

Note: You will now be able to receive Group Connect communications from this Talkgroup only. You can only monitor one Talkgroup at a time.

8