Nexus 21 NX2000 operation manual Set Group Id, Set Manual Position/UTC

English VHF NX2000

Press (CLR) key to go back to the main screen.

To change the MMSI number after it has been programmed, the unit must be returned to an authorized dealer to erase the existing number.

10.2Set Group Id

To enter a Group ID (if for example, the vessel is part of a flotilla or fishing fleet etc), press (MENU) key to select the GROUP ID screen. The screen will be displayed as below:

Press numeric key to enter the GROUP ID number (8-digits, the first digit must be “0”). If a mistake is made, use the ◄ or ► key to move back the cursor and reset the number. Press (ENT) key and the Radio will ask for verification. Check that the No. is correct and press (ENT) key once again to confirm your entry. To amend, press (CLR) key to go back to main screen.

10.3Set Manual Position/UTC

If the position of the vessel cannot be obtained from a GPS via the NMEA 0183 input, this data can be entered manually.

28