SYSTEM CONNECTION
1.The player is equipped with composite A/V outputs at the rear of the player. Your TV will require at least one set of A/V inputs. The patch cord supplied with the player will connect the A/V output jack of your player to your TV’s inputs.
2.To view the DVD signal, please press the “AV/TV” button on the TV or remote control of your TV to switch TV’s mode from broadcast reception mode to one of the A/V signals. Your TV should have more than one A/V input.
3.The player is equipped for stereo playback. To fully realize the 2 channel sound, a Stereo TV or A/V receiver is necessary. However, a Mono TV may be used providing the TV has one set of A/V inputs. The A/V inputs on a Mono TV will only include one Audio input for Mono sound. You may connect either the Left or Right audio channel from the DVD composite audio out to the Mono TV audio input.
8
