Part One – Your Nighthawk CO Alarm

Where to Install Your CO Alarm

Your Nighthawk CO alarm should be mounted in or near bedrooms and living areas. It is recommended that you install a Nighthawk CO alarm on each level of a multi-level home. You may use the number and location of smoke alarms installed in your home according to current building code requirements as a guide to the location of your Nighthawk CO alarm(s).

WHEN CHOOSING YOUR INSTALLATION LOCATIONS, MAKE SURE YOU CAN HEAR THE ALARM FROM ALL SLEEPING AREAS. IF YOU INSTALL ONLY ONE CARBON MONOXIDE ALARM IN YOUR HOME, INSTALL THE ALARM NEAR BED- ROOMS, NOT IN THE BASEMENT OR FURNACE ROOM.

TWO SELF ADHESIVE LABELS ARE INCLUDED WITH THE CO ALARM. ADD THE PHONE NUMBER OF YOUR EMERGENCY SERVICE PROVIDER IN THE SPACE PROVIDED. PLACE ONE LABEL NEXT TO THE ALARM AND ONE LABEL NEAR A FRESH AIR SOURCE SUCH AS A DOOR OR WINDOW.

CAUTION: This CO alarm will only indicate the presence of carbon monoxide at the sensor. Carbon monoxide may be present in other areas.

IMPORTANT: Improper location can affect the sensitive electronic components in this CO alarm. Please see the next section describing where NOT to install this CO alarm.

Where Not to Install Your CO Alarm

To avoid causing damage to the CO alarm, to provide optimum protection, and to prevent unnecessary alarms, follow the direc- tions below where NOT to install this CO alarm:

It is not recommended that you install this CO alarm in garages, kitchens or furnace rooms. Installation in these areas could lead to nuisance alarms, may expose the sensor to substances that could damage or contaminate it, or the alarm may not be heard by persons in other areas of the home, especially if they are sleeping.

In the garage, vehicle exhaust can contain some carbon monoxide. These levels are higher when the engine is first started. CO levels in a garage may not be sufficient to activate the alarm immediately. Within hours of starting a vehicle and backing it out of the garage, the levels present over time can activate the alarm and become a nuisance.

In the kitchen and furnace room, some gas appliances can emit a short burst of carbon monoxide upon startup. This is normal. If your CO alarm is mounted too close to these appliances, it may alarm often and become a nuisance.

Part One – Your Nighthawk CO Alarm

If you must install a Nighthawk CO alarm near a cooking or heating appliance, install AT LEAST 15 feet away from the appliance.

Do not install in excessively dusty, dirty or greasy areas such as kitchens, garages and furnace rooms. Dust, grease or household chemicals can contaminate or coat the CO alarm’s sensor, causing the unit not to operate properly.

Do not obstruct the vents located at the top and bottom of the CO alarm. Place the CO alarm where drapes, furniture or other objects do not block the flow of air to the vents.

Do not install in dead air space, such as peaks of vaulted ceilings or gabled roofs, where carbon monoxide may not reach the sensor in time to provide early warning.

Do not install in turbulent air from ceiling fans. Do not install near doors and windows that open to the outside, near fresh air vents, or anywhere that is drafty. Rapid air circulation from fans or fresh air from outside may affect the unit’s alarm response time.

Do not install this CO alarm in a switch- or dimmer-controlled outlet.

Do not install in areas where the temperature is colder than 40˚F (4.4˚C) or hotter than 100˚F (37.8˚C). These areas include uncondi- tioned crawl spaces, attics, porches and garages. Extreme temperatures will affect the sensitivity of the alarm.

Do not install CO alarm near deep cell large batteries. Large batteries have emissions that can cause the CO alarm to perform at less than optimal performance.

1-5

1-6

Page 7
Image 7
Nighthawk KN-COP-DP, KN-COP-C, KN-COP-HW warranty Where to Install Your CO Alarm, Where Not to Install Your CO Alarm

KN-COP-HW, KN-COP-DP, KN-COP-C specifications

The Nighthawk KN-COP series, which includes the KN-COP-HW, KN-COP-DP, and KN-COP-C models, represents a significant advancement in the realm of smoke and carbon monoxide detection technology. Designed with user safety and convenience in mind, these models integrate innovative features to ensure reliable performance in residential and commercial spaces.

One of the standout characteristics of the KN-COP series is their dual-sensor technology. This feature enhances detection capabilities by incorporating both photoelectric and ionization sensors. The photoelectric sensor is particularly effective in detecting smoldering fires, while the ionization sensor quickly identifies flaming fires. This combination allows the devices to respond accurately to a variety of fire scenarios, thereby increasing overall safety.

The KN-COP-HW model also boasts a sleek, modern design that fits seamlessly into any decor while being functional. It features a voice alarm system that clearly announces the type of danger detected, whether it's smoke or carbon monoxide, ensuring that users can react appropriately without confusion. Additionally, an LCD display provides real-time updates about CO levels, temperature, and battery status.

Another notable feature across the KN-COP lineup is the ease of installation and maintenance. Each unit is equipped with a battery backup, ensuring continuous operation even during power outages. The user-friendly design includes a simple test/silence button, making periodic checks and silencing false alarms hassle-free.

The KN-COP-DP variant elevates safety with advanced connectivity options. This model can be interconnected wirelessly with other Nighthawk units, allowing for synchronized alerts throughout larger spaces. This interconnected network provides comprehensive coverage, ensuring that everyone within the building is alerted in case of a potential emergency.

For users looking for a compact solution, the KN-COP-C model is engineered for optimal performance within smaller spaces. It retains the essential features of its counterparts but in a form factor that is easier to integrate into compact living environments.

Overall, the Nighthawk KN-COP series exemplifies a commitment to quality, safety, and innovative technology. Whether it's the homeowner seeking peace of mind or a business aiming to protect its assets, these detectors serve as a formidable first line of defense against the dual threats of smoke and carbon monoxide, ensuring that safety always comes first.