5
System Installation Checklist
Basic Checklist Summary
This is a reminder of the basic steps to get your control system configured and running.
Hardware installation and external connections
Configure all necessary jumpers on each board.
Plug boards into the backplane in the correct slots.
Connect the control system to an external 12 VDC power source.
Connect the CPU’s DB-9 connector to your PC.
Connect each RCB’s DB-9 connector to your external devices: radios (repeater, RF
links, remote base radios), VOIP computers, etc.
Software configuration
Set basic configuration parameters
Call sign
Site prefix
Location ID
Unlock code
Set radio port configuration
Set audio levels
Customize commands
Save the configuration to a file
Download configuration to the control system