Sierra 200 Site Prefix Commands , Site Location ID Commands

C117 (u) Get ID Returns the primary ID string

C118 (u) Sets the secondary ID string.

S118 (u) This is used by radios for which the secondary ID flag bit is set.

C119 (u) Get ID2 Returns the secondary ID string

Site Prefix Commands

C120 (u) Sets the prefix string. Syntax is the same as for Set ID. Beware that only 0..9,

S120 (u) A..D, and # can be used. The prefix can be up to 4 characters long.

C121 (u) Get prefix Returns the prefix

C122 (u) Sets the location string. Syntax is the same as for Set ID.

S122 (u) The location strings can be up to 9 characters long.

C123 (u) Get location Returns the location string

C124 (u) Sets the secondary location string. Syntax is the same as for Set ID.

S124 (u) This location string will be appended to the ID for ports with the append

location flag bit set (default is not set).

C125 (u) Get location 2 Returns location string 2

Link Name

C126 (u) Sets the link name for one port.

This is transmitted in the link status response along with the link number and

status.

Syntax is the same as the set macro command.

The maximum length for the name string is 6 characters.