69
Remote Base Commands
C380 (u) Enable remote base port transmit
Enables remote base port transmit.
Syntax is C380r, where r is the logical port number 0..7.
Will not do anything unless the port link status is on.
C381 (u) Disable remote base port transmit
Disables remote base port transmit.
Syntax is C381r, where r is the logical port number 0..7.
C382 (u) Disconnect all remote base ports
Disconnects all remote base ports (disables transmit and sets link on/off status
to normal state).
Normally used be remote base timeout.
C401 (u) Set remote base emission mode
Syntax is C401rnnnn, where r is the logical port number and nnn is the
emission type.
C402 (u) Set remote base radio frequency in MHz
Syntax is C402rffffff, where r is the logical port number and ffffff
is the frequency in MHz.
C403 (u) Set remote radio base freuquency in kHz
Syntax is C403rfffffff, where r is the logical port number and fffffff
is the frequency offset from the set band value, in kHz.