57
commands which require an unlock code.
C304 (u) Link reset
• Operates on the current group only
• Connects link ports according to their normal link state as defined
in the group definitions.
• Does not change whether locals are connected.
• Turns off remote monitor
• Turns link delay on
• Set link PL to normal state
• Remote base transmitters disabled
C305 (u) Local reset
• Connects the normally connected local ports in the current group.
• Does not changed the link on/off status of non-locals.
C306 (u) Link reset flexible
Takes single byte options parameter to define command behavior, as for
lnkrstdefs configuration parameter in C304.
Syntax is C306o, where o is the option byte, above.
Always turns off remote base transmitters.
C307 (u) Group normal
Same as site normal, but only operates on the current group.
C308 (u) Break all links
Disconnects all ports in the current group.