LG Electronics 72WX70MF owner manual On Timer Input Command f u Sleep Time Command f f

			CONTROLLING THE MULTIPLE PRODUCT 67
27. On Timer Input (Command: f u)		28. Sleep Time (Command: f f)
To select an external input for the current On Time		To set the Sleep Time.
setting and add a new schedule or change the
			Transmission
existing schedule.
			[f][f][ ][Set ID][ ][Data][Cr]
	Transmission		Data 00: Off (Sleep Timer	off)
	[f][u][ ][Set ID][ ][Data1][Cr]
			01: 10 min.
	[f][u][ ][Set ID][ ][Data1][Data2][Cr]		02: 20 min.
Data (Add schedule)			03: 30 min.
20: Input (AV)			04: 60 min.
40: Component			05: 90 min.
60. RGB			06: 120 min.
70: DVI-D			07: 180 min.
90: HDMI (HDMI1)			08: 240 min.
C0: Display Port
			Acknowledgement
91: HDMI2/SDI
			[f][ ][Set ID][ ][OK/NG][Data][x]
B0:SuperSign
Data1 (Change schedule)
1. f1h to f4h (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2
20: Input (AV)
40: Component		29. Power On Delay (Command: f h)
60: RGB		To set the schedule delay when the power is turned
70: DVI-D		on. (Unit: Second)
90: HDMI (HDMI1)
			Transmission
C0: Display Port
			[f][h][ ][Set ID][ ][Data][Cr]
91: HDMI2/SDI
		Data 00 to 64: min. 0 to max. 100 (sec.)
B0:SuperSign
* To read the schedule input, enter FFH for [Data2].
			Acknowledgement
If no schedule is available for [Data1] when
			[h][ ][Set ID][ ][OK/NG][Data][x]
attempting to read or change the schedule data, the
text NG will be displayed and the operation fails.
(Example 1: fu 01 60 - Move each schedule input
down one row and save the 1st schedule input in
RGB mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule
input.)
(Example 3: fu 01 f3 20 - Change the 3rd data
schedule input to the current On Time and AV input.
If there is no third schedule, the text NG will be
displayed and the operation fails.)
* This function is supported only when Time 1 (Year/
Month/Day), Time 2 (Hour/Minute/Second), On Time		30. Automatic Standby (Command: m n)
(Repeat Mode/Time) are set.
		To set the Automatic Standby function.
** It may not be supported depending on the model.
			Transmission
	Acknowledgement
			[m][n][ ][Set ID][ ][Data][Cr]
	[u][ ][Set ID][ ][OK/NG][Data][x]
		Data 00: Off (No off after 4 hours)
	[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
			01: 4 Hours (Off after 4 hours)
			Acknowledgement
			[n][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH