58
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
CONTROLLING THE MULTIPLE PRODUCT
yUse this method to connect several products to a single PC. You can control several products at a
time by connecting them to a single PC.
yIn the Option menu, Set ID must be between 1 and 255 without being duplicated.

Connecting the Cable

Connect the RS-232C cable as shown in the picture.
yThe RS-232C protocol is used for communication between the PC and product. You can turn the
product on/off, select an input source or adjust the OSD menu from your PC.

Communication Parameter

RS-232C Configurations

PC Set
D-Sub 9 D-Sub 9
(Female) (Female)
PC Set
D-Sub 9 D-Sub 9
(Female) (Female)
yBaud Rate: 9600 BPS
yData Length: 8 bit
yParity Bit: None
yStop Bit: 1bit
yFlow Control: None
yCommunication Code: ASCII code
yUse a crossed (reverse) cable
7-Wire Configurations (Standard RS-232C cable) 3-Wire Configurations (Not Standard)
Monitor 1 Monitor 2 Monitor 3 Monitor 4
PC
RS-232C Cable (not included)