2

Introduction—First Steps

Step 2—Insert the Battery

The D2X is powered by a rechargeable Nikon EN-EL4 Li-ion battery (provided).

2.1 Charge the battery

The EN-EL4 is not fully charged at shipment. To maximize shooting time, charge the battery in the supplied MH-21 quick charger before use (see the MH-21 instruction manual for details). About 100 minutes are required to fully recharge the battery when no charge remains.

2.2 Turn the camera off

Turn the camera off before inserting or re- moving batteries.

2.3 Remove the battery-chamber cover Turn the battery-chamber cover latch to the open position () and remove the battery- chamber cover.

2.4 Attach the battery cover to the battery The battery can be charged with the cover attached. See the instructions provided with the EN-EL4 for details.

2.5 Insert the battery

Insert the battery as shown at right.

2.6 Latch the battery-chamber cover

To prevent the battery from being dislodged during operation, be sure the cover is se- curely latched.

Removing the Battery

Before removing the battery, turn the camera off and rotate the battery-chamber cover latch to the open position ( ).

EN-EL4 Rechargeable Li-ion Batteries

The EN-EL4 shares information with compatible devices, enabling the camera to show battery charge state in six levels and the MH-21 to both display the current level and charge the battery appropriately. The Battery info option in the setup menu details battery charge, battery life, and the number of pictures taken ( 219).

16

Page 30
Image 30
Nikon 25215 manual Insert the Battery, Removing the Battery, EN-EL4 Rechargeable Li-ion Batteries