Taking Photographs—White Balance

Copying White Balance from d-0 to Presets d-1d-4 To copy a measured value for white balance from d-0 to any of the other presets (d-1d-4), highlight the destination preset in the thumbnail display and press the center of the multi selector

as described in steps 1–3 on page 63. The menu shown at right will be displayed.

1 Press the multi selector up or down to high- light Copy d-0.

2 Press the multi selector to the right to copy white balance from d-0 to the selected preset and return to the thumbnail display. If com- ment has been created for d-0, the comment will be copied to the comment for the selected preset.

Nikon Capture 4

Nikon Capture 4 version 4.2 or later (available separately) can be used to edit white balance when RAW photographs taken with the D2X are displayed on a computer. The edited value can be copied directly to a white balance preset while the camera is connected to a computer, or the image can be saved to the camera memory card and the white balance value copied using the Select image option in the preset menu. Any comments created with Nikon Capture 4 will also be copied to the comment for the selected preset. See the Nikon Capture 4 manual for details.

66

Page 80
Image 80
Nikon 25215 manual Nikon Capture