Connecting to a Computer

Data Transfer and Camera Control

The supplied UC-E4 USB cable can be used to connect the camera to a com- puter. Once the camera is connected, PictureProject can be used to copy photographs to the computer, where they can be browsed, viewed, and retouched. The camera can also be used with Nikon Capture 4 version 4.2 or later (available separately), which supports batch processing and more ad- vanced image editing options and can be used to control the camera directly from the computer.

Before Connecting the Camera

Install the necessary software after reading the manuals and reviewing the system requirements. To ensure that data transfer is not interrupted, be sure the camera battery is fully charged. If in doubt, charge the battery before use or use an EH-6 AC adapter (available separately).

Before connecting the camera, set the USB option in the setup menu ( 216) according to the com- puter operating system and whether the camera is being controlled from Nikon Capture 4 version

4.2or later (available separately) or photographs are being transferred to the computer using Pic- tureProject:

 

PictureProject

Nikon Capture 4

Operating system

Transfer

Camera Control

Windows XP Home Edition

Choose PTP or

 

Windows XP Professional

 

Mac OS X

Mass Storage

 

 

 

Windows 2000 Professional

Choose

Choose PTP

Windows Millennium Edition (Me)

 

Mass Storage*

 

Windows 98 Second Edition (SE)

 

 

 

Mac OS 9

Not supported

 

*Do NOT select PTP. If PTP is selected when the camera is connected, the Windows hardware wizard will be displayed. Click Cancel to exit the wizard, and then discon- nect the camera. Be sure to select Mass storage before reconnecting the camera.

Connections—Connecting to a Computer

231

Page 245
Image 245
Nikon 25215 manual Connecting to a Computer, Before Connecting the Camera, 231, Data Transfer and Camera Control