Nikon 9350 manual Information

No	Nikon cameras operated in the manual mode
Information	only, will provide accurate exposure
in the	information. Canon EOS camera operated
Viewfinder	in the manual mode will provide accurate
	exposure information. Nikon cameras using
	the 200mm Electrophysics lens will provide
	no information in the viewfinder. Canon
	XL camcorders provide complete
	information in the viewfinder regardless of
	the operating mode.
Flashing “No	Check to make sure the 16x lens is securely
Lens” on the	attached to the 9350FLA, the 9350BBA is
Canon XL	securely attached to the camcorder and a
Camcorder	CIU is properly installed inside the adapter
	pair.
No Power	The 9350EPS requires two AAA batteries to
Using	power the CIU. If the batteries are dead,
9350BRAC	you will not see the green image in the
Adapters	viewfinder. The camcorder must be turned
	on as well.
No Power	The 9350EPA requires two AAA batteries
Using the	to power the CIU. If the batteries are dead,
Pocket Scope	you will not see the green image in the
adapter	eyepiece.
No Power	The 9350BBA-C requires a power source of
Using the	3-12 volts to operate. You will not see the
9350BBA-C	green image if the power connection is not
adapter	made.
Problems	You must use the special EOS-N Back
Using the	Body Adapter when using a Canon EOS
200mm	camera. Set the camera to f/1.8 to interface
Catadioptric	with the lens. The standard EOS Back
Lens on a	Body Adapter will NOT operate with this
Canon EOS	lens.
Camera
Non-uniform	Sometimes an intensifier tub exhibits a faint
Image	hexagonal pattern (honeycomb). This is a
	result of the manufacturing process.
	Note: Do not be concerned if you see this
	feature. It is an inherent characteristic
	found in light amplification night vision
	systems that incorporate a microchannel
	plate in the intensifier.
Dark Spots in	A few black spots throughout the image
Image	area are also inherent characteristics of all
	night vision technology. These spots will
	remain constant and should not increase in
	size or number.

4-2