Nikon 9350 manual Use on Nikon Digital Cameras, Use on Canon Digital Cameras

Hole in CIU

Silver Alignment Pin

The Back Body Adapter (BBA) has a silver alignment pin on the inside. Align this pin with the hole in the CIU and thread the BBA to the FLA.

2.1.3Notes on Optimal Use

2.1.3.1Use on Nikon Digital Cameras

1.In the “Shooting Menu,” select and set the ISO to 1600 or a comparable fast ISO setting. Some cameras limit the ISO to 800 while others allow up to 6400.

2.In the “Custom Functions” menu, select ISO Auto and turn it off.

3.In the “Custom Functions Menu”, select AF Assist and turn it off. This will prevent the focus assist light from turning on and helping the camera focus or give your position away.

4.The camera should be set in a “Manual Exposure Mode”, not Aperture, Shutter, or Program mode.

5.The lens iris should be set to its widest open position (f/1.4 as an example).

6.The shutter speed should start off at 1/30th of a second, as this is the slowest shutter speed you can hand-hold the camera. This can be adjusted to a faster shutter speed if directed by the camera’s meter.

7.Using the camera’s meter, you can adjust the shutter speed as required for a perfect exposure.

8.In extreme low-light conditions, you may want to adjust the “exposure compensation” to a +2 stop.

2.1.3.2Use on Canon Digital Cameras

Note: To prevent the camera from making any noise, flashing, and illuminating the LCD panel, it is suggested to set the camera as follows:

1.Turn the dial on the top left to the “M” position.

2.Press the “Menu” button once.

3.Red-eye On/Off – Set to “Off”.

4.AEB – Set to “0”.

5.ISO – Set to a minimum of “1000”.

6.Beep – Set to “Off”.

2-6