16
The Basics of Shooting and Playback
The Basics of Shooting and Playback

Preparation 1 Charge the Battery

1Connect the power cable in the order indicated below.
2Insert the battery into the battery charger
by sliding the battery forward (1), and
press down until it locks into place (2).
CHARGE lamp starts blinking when charging starts.
A fully-exhausted battery charges in about two
hours and 30minutes.
When charging is complete, the CHARGE lamp
stops blinking.
See “Understanding CHARGE Lamp (A17).
3When charging is complete, remove the battery, and then unplug the
charger.