Shooting Features

Features That Can Be Set Using the Multi Selector

Flash Modes (Using the Flash)

You can set a flash mode that suits the shooting conditions.

1 Press H(mflash mode) on the multi selector.

2Press the multi selector to select the desired

mode and press the kbutton.

See “Available Flash Modes” (A55) for more information.

If the k button is not pressed within a few seconds,

the selection will be canceled.

Flash mode

When U(auto) is applied, Dis only displayed for

a few seconds, regardless of Photo info settings (A94).

3Frame the subject and take a picture.

The flash lamp indicates the status of the flash when you press the shutter-release button halfway.

- On: The flash will fire when you press the shutter- release button all the way.

- Blinking: The flash is charging. The camera cannot take pictures.

- Off: The flash will not fire when a picture is taken.

If the battery is low, the monitor will be turned off while the flash is charging.

CEffective Range of the Flash

The flash has a range of about 0.3 to 3.5 m (1 ft to 11 ft) for wide-angle position, and about

540.5 to 2.2 m (1 ft 8 in. to 7 ft 2 in.) for telephoto zoom position (when ISO sensitivity is set to Auto).

Page 78
Image 78
Nikon COOLPIX AW100 Flash Modes Using the Flash, Frame the subject and take a picture, Effective Range of the Flash