Yamaha RX-V2700 owner manual Clearing configurations, 118 En, Clearing function sets

REMOTE CONTROL FEATURES
Clearing configurations
	3 Press and hold CLEAR again for about 3
You can clear all changes made in each function set, such	seconds.
	“WAIT” appears in the display window. If clearing
as learned functions, macros, renamed input area names
	was successful, “C;OK” appears in the display
and setup remote control ID.
	window on the remote control.

■Clearing function sets

1Set the operation mode selector to AMP or SOURCE and then press CLEAR by using a ballpoint pen or similar object.

“CLEAR” appears in the display window.

AMP

SOURCE

TV

CLEAR

or

AMP

SOURCE

TV

CLEAR

y

Once you have cleared a learned function for a button, the button reverts to the factory setting (or to the manufacturer setting, if you have set remote control codes).

Notes

•“L;ALL” and “FCTRY” may take about 30 seconds to complete.

•“C;NG” appears in the display window if clearing was unsuccessful. In this case start over from step 2.

•“ERROR” appears in the display window if you press a button not indicated in the respective step, or if you press more than one button simultaneously.

Note

If you do not complete each of the following steps within 30 seconds, the clearing mode will be automatically canceled. In this case, start over from step 1.

2Press k / n to select the clear mode.

L;CD (etc.) (L; Name of an input area)

Clears all learned functions in the respective input area. The name of a component is shown

	after a semicolon (;). Press an input selector
	button to select the input area.
L;AMP	Clears all learned functions for controlling the
	amplifier functions of this unit.
L;ALL	Clears all learned functions.
M;ALL	Clears all programmed macros.
RNAME	Clears all renamed source names.
FCTRY	Clears all remote functions and returns the
	remote to the factory settings.
	PRESET/CH
	ENTER
	A/B/C/D/E

118 En