Yamaha RX-V2700 owner manual 90 En, Tone Control Tone control

GRAPHIC USER INTERFACE (GUI) SCREEN

4Press n to select “EDIT” and press ENTER to access the edit window.

	Band	#1
	Gain	0.0dB
Test Tone	Freq.	125.0Hz
	Q	1.000
Front L
Front R
Center

The parameter selected in “PARAM” is highlighted.

•Press l / h to adjust the parameter.

•Press k / n to adjust the “Gain”.

•Press ENTER to exit the edit window.

y

•When you select “Band” in step 3, you can use this menu as a graphic equalizer.

•The “Band #1” and “Band #2” can adjust the frequencies below of 198.4 Hz.

•When you select “Subwoofer” in step 1 and “Band” in step 3, you can adjust “Band #1” and “Band #2” only.

•For more information on the parametric equalizer, see page 89.

5Repeat steps 3 and 4 until you are satisfied with the results.

y

If you want to reset all “Parametric EQ” parameter settings for the selected speaker, select “RESET” and press ENTER.

6Select “EXIT” and press ENTER to exit the settings window.

■Tone Control (Tone control)

Use this feature to adjust the balance of bass and treble output to your speakers or headphones.

Choices: Control, Bass, Treble, Audio Bypass

Note

Tone Control is not effective when:

–PURE DIRECT (see page 52) is selected.

–MULTI CH INPUT is selected as the input source.

Control (Tone control)

Choices: Speakers, Headphones

Control	Speakers
Bass	Headphones
Treble

•Select “Speakers” to adjust the bass/treble balance of your speakers.

•Select “Headphones” to adjust the bass/treble balance of your headphones.

y

“Speaker” and “Headphone” adjustments are stored independently. The adjustments for “Speaker” affects the front left/right, center, presence left/right speaker channels and Subwoofer channel.

Bass (Bass control)

Use this feature to adjust low-frequencies output to your speakers or headphones.

Choices: 125 Hz, 350 Hz, 500 Hz

Control range: – 6.0 dB to + 6.0 dB

Initial setting: 0.0 dB

	Speaker
Control	Freq : 350Hz
	Gain : 0.0dB
Bass	+6
Treble	+0
Audio Bypass	-6

Treble (Treble control)

Use this feature to adjust high-frequencies output to your speakers or headphones.

Choices: 2.5 kHz, 3.5 kHz, 8.0 kHz

Control range: – 6.0 dB to + 6.0 dB

Initial setting: 0.0 dB

Control	Speaker
Bass	Freq : 3.5kHz
	Gain : 0.0dB
Treble	+6
Auto Bypass	+0
	-6

90 En