Yamaha RX-V2700 owner manual 84 En, Compressed Music Enhancer mode parameter descriptions

GRAPHIC USER INTERFACE (GUI) SCREEN

■The Compressed Music Enhancer mode parameter descriptions

The Compressed Music	Features
Enhancer mode
2ch Enhancer	2-channel enhancer or 7-channel enhancer effect level. Select “High” or “Low” to adjust the effect for
7ch Enhancer	the high-frequency.
	Choices: High, Low

■Decoder parameter descriptions

Decoder parameter Features

Pro Logic IIx Music PRO LOGIC II Music

Panorama

Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect.

Choices: Off, On

PRO LOGIC IIx Music PRO LOGIC II Music

Dimension

Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the front)

Initial setting: STD (standard)

PRO LOGIC IIx Music PRO LOGIC II Music

Center Width

Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output completely towards the center speaker or towards the front left and right speakers. A larger value moves the center channel output towards the front left and right speakers.

Control range: 0 (center channel sound is output only from the center speaker) to

7 (center channel sound is output only from the front left and right speakers)

Initial setting: 3

DTS Neo:6 Music	DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the center
Center Image	channel to make the center channel more or less dominant as necessary.
	Control range: 0.0 to 1.0
	Initial setting: 0.3

■Initialize (Program parameters initialization)

Use this feature to initialize the parameter of the selected sound field program.

Choices: No, Yes

SB Room Size

Dialogue Lift

Initialize No

Yes

•Select “Yes” to set the program parameters to the factory default settings.

•Select “No” to cancel the program parameter initialization.

y

Use the “Sur. Initialize” feature in “Option” to initialize the parameters of each sound field program within a sound field program group (see page 105).

84 En