Yamaha RX-V2700 owner manual 117 En, Press the macro button you want to use to Operate the macro

			REMOTE CONTROL FEATURES
■ Programming macro operations
		Note
You can program your own macro and use the macro
		“AGAIN” appears in the display window if you press a
programming feature to transmit several remote control
commands in sequence at the press of a button. Be sure to		button other than a macro button.
set up remote control codes or perform learning operations
	3 Press the buttons for the functions you want
before programming the macro.
		to include in the macro operation in
Notes		sequence.

•The default macro is not cleared when a new macro is programmed for a button. The default macro can be used again when the programmed macro is cleared.

•It is not possible to add a new signal (macro step) to the default macro. Programming a macro changes all macro contents.

•We do not recommend programming continuous operations such as volume control in a macro.

1Set the operation mode selector to AMP or SOURCE and then press MACRO using a ballpoint pen or similar object.

“MCR ?” appears in the display window on the remote control.

AMP

SOURCE

TV

or	MACRO
AMP
SOURCE
TV

Note

If you do not complete each of the following steps within 30 seconds, the macro programming mode will be automatically canceled. In this case, start over from step 1.

You can set up to 10 steps (10 functions). After you have set 10 steps, “FULL” appears and the remote control automatically exits the macro mode. The following example is for programming the following procedure:

Step 1 (“MCR 1”): Press DVD.

Step 2 (“MCR 2”): Press AV POWER.

Step 3 (“MCR 3”): Press SLEEP.

MCR 2: AV POWER

POWER POWER STANDBY POWER

TV	AV	2		MCR 3: SLEEP
	NET/USB AUDIO SEL SLEEP
PHONO	TUNER	CD	MULTI CH IN 3

V-AUX/DOCK	CBL/SAT	MD/TAPE	CD-R
DTV	VCR 1	DVR/VCR 2	DVD

1

MCR 1: DVD

Indicates the number of macro steps entered

Flashes alternately so you can set the next step

OPERATION ADVANCED

2 Press the macro button you want to use to		Note
operate the macro.		To change the selected input area, press SELECT k / n.
The macro button name (ex. “M;DVD”) and the		Pressing the input selector buttons will program a macro step,
selected component name (ex. “DVD”) appear		whereas SELECT k / nonly changes the selected input area.
alternately in the display window on the remote
	4 Press MACRO again using a ballpoint pen or
control.
STANDBY POWER		similar object when the operation sequence
		you want to program is complete.

NET/USB Note

PHONO	TUNER	CD	MULTI CH IN
V-AUX/DOCK	CBL/SAT	MD/TAPE	CD-R
DTV	VCR 1	DVR/VCR 2	DVD

“ERROR” appears in the display window if you press more than one button simultaneously.

English

117 En