Preparing the remote control

■Installing batteries in the remote control

2 1

3

1Press the part and slide the battery compartment cover off.

2Insert the four supplied batteries (AAA, LR03) according to the polarity markings (+ and –) on the inside of the battery compartment.

3Slide the cover back until it snaps into place.

■Installing batteries in the Zone 2/Zone 3 remote control

13

2

1Take off the battery compartment cover.

2Insert the two supplied batteries (AAA, LR03) according to the polarity markings

(+ and –) on the inside of the battery compartment.

3Snap the battery compartment cover back into place.

CONTROLS AND FUNCTIONS

Notes

•Change all of the batteries if you notice the following conditions:

–the operation range of the remote control decreases.

–the TRANSMIT indicator does not flash or its light becomes dim.

•Do not use old batteries together with new ones.

•Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

•We recommend using alkaline batteries.

•If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

•Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.

•If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the remote control code and program any acquired functions that may have been cleared.

■Using the remote control

The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.

Remote control sensor

Approximately 6 m

30

30

 

Notes

•Do not spill water or other liquids on the remote control.

•Do not drop the remote control.

•Do not leave or store the remote control in the following types of conditions:

–places of high humidity, such as near a bath

–places of high temperatures, such as near a heater or stove

–places of extremely low temperatures

–dusty places

INTRODUCTION

English

11 En

Page 12 Page 14
Page 13
Image 13
Yamaha RX-V2700 Preparing the remote control, 11 En, Installing batteries in the remote control, Using the remote control
Page 12 Page 14

RX-V2700 specifications

The Yamaha RX-V2700 is a powerful and versatile AV receiver that is designed to deliver high-quality audio and video performance for home theater enthusiasts. With its robust features and advanced technologies, the RX-V2700 aims to enhance the overall entertainment experience.

One of the standout features of the RX-V2700 is its support for high-definition audio formats. It is equipped with decoding capabilities for Dolby TrueHD and DTS-HD Master Audio, which allows users to enjoy lossless audio quality from Blu-ray discs and other high-definition media. This, combined with a 7.1-channel surround sound system, creates an immersive listening experience that brings movies, music, and games to life.

The RX-V2700 also features YPAO (Yamaha Parametric room Acoustic Optimizer), a sophisticated room calibration technology. This system automatically analyzes the acoustics of the room and adjusts the settings of the receiver to achieve optimal sound performance. This ensures that users experience the best possible audio quality regardless of their room’s size or shape.

In terms of connectivity, the RX-V2700 provides a wide range of options. It includes multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports HDMI version 1.3, which allows for higher bandwidth and additional features such as Deep Color and x.v.Color for enhanced video quality.

For video processing, the RX-V2700 is equipped with a high-quality video upscaling feature. It can upscale standard definition video sources to 1080p, ensuring that all content looks great on modern HD displays. The receiver also supports Picture-in-Picture functionality, enabling users to watch multiple sources simultaneously.

Another notable characteristic of the RX-V2700 is its sleek design, which fits seamlessly into any home entertainment setup. The front panel offers a user-friendly interface, making it easy to navigate through settings and options.

The Yamaha RX-V2700 stands out with its combination of advanced audio and video technologies, ensuring it can enhance any home theater setup. Whether for movie nights, music listening, or gaming sessions, the RX-V2700 delivers an impressive audio-visual performance that caters to the needs of discerning users. With its variety of features, it remains a popular choice for those seeking a comprehensive AV receiver solution.
Top Page Image Contents