Yamaha RX-V2700 owner manual 37 En

9Repeat steps 7 and 8 until you set all the desired parameters.

Skip

Wiring Check

Distance

Size

Wiring	Skip
Distance	Check
Size
Equalizing
Wiring
Distance	Skip
Size	Check
Equalizing
Level
Distance
Size	Skip
Equalizing	Check: Natural
Level	Check: Flat
	Check: Front

AUTO SETUP

Equalizing (Parametric equalizer level)

Adjusts the frequency and the parametric equalizer level of each channel to reduce coloration across the channels and create a cohesive sound field. This is particularly important if you use different brands or sizes of speakers for some channels or have a room with unique sonic characteristics. In addition, the frequency response of each channel is adjusted in accordance with the sound output from your front speakers.

Choices: Check:Natural, Check:Flat, Check:Front, Skip

•Select “Check:Natural” to average out the frequency response of all speakers with higher frequencies being less emphasized. Recommended if the “Check:Flat” setting sounds a little harsh.

•Select “Check:Flat” to average the frequency response of all speakers. Recommended if all of your speakers are of similar quality.

•Select “Check:Front” to adjust the frequency response of each speaker in accordance with the sound of your front speakers. Recommended if your front speakers are of much higher quality than your other speakers.

•Select “Skip” to skip the selected item and perform no adjustments.

PREPARATION

Size		Level (Volume level)
Equalizing	Skip
Level	Check	Checks and adjusts the volume level of each speaker.
		Choices: Check, Skip
This unit performs the following checks:		• Select “Check” to automatically check and adjust
		this item.
Wiring (Speaker wiring)		• Select “Skip” to skip this item and perform no
		adjustments.
Checks which speakers are connected and the
polarity of each speaker.
		10 Once you have selected the desired settings
Distance (Speaker distance)		of each parameter, press l to return to the
Checks the distance of each speaker from the		previous menu level and then press n to
listening position and adjusts the timing of each		select “Start”.

channel.
Size (Speaker size)	Information
Checks the frequency response of each speaker and	Setup Menu
sets the appropriate low-frequency crossover for each	Start	Start: ENTER
channel.

Choices: Check, Skip

•Select “Check” to automatically check and adjust the item.

•Select “Skip” to skip the item and perform no adjustments.

English

37 En