Yamaha RX-V2700 Manual Setup Basic, 95 En, Position GUI screen position, Wall Paper Wall paper

■Position (GUI screen position)

Use this feature to adjust the vertical and horizontal position of the GUI screen.

Control range: –5 (downward/left) to +5 (upward/right)

Short Message	/ :+5 / :-5
On Screen
Position	+
Wall Paper

•Press k to raise the position of the GUI display.

•Press n to lower the position of the GUI display.

•Press h to shift the position of the GUI display to the right.

•Press lto shift the position of the GUI display to the left.

■Wall Paper (Wall paper)

Use this feature to display the wall paper or gray background in your video monitor when there is no video signal being input.

Choices: None, Yes, Gray

On Screen
Position	None
Wall Paper	Yes
	Gray

•Select “None” not to display any background in your video monitor.

•Select “Yes” to display a background image (the photograph of a piano) in your monitor when there is no video signal being input.

•Select “Gray” to display a gray background in your monitor when there is no video signal being input.

Note

When “Conversion” is set to “Off”, no background is displayed even if “Wall Paper” is set to “Yes”.

GRAPHIC USER INTERFACE (GUI) SCREEN

Manual Setup (Basic)

Use this menu to manually adjust any speaker setting.

1Set the operation mode selector to AMP and then press SET MENU on the remote control.

AMP
	SET MENU
SOURCE	MENU
TV	SRCH MODE

2Press k / n on the remote control to select “Manual Setup” and then press h.

PRESET/CH	PRESET/CH
ENTER	ENTER
A/B/C/D/E	A/B/C/D/E

3Press k / n / l / h on the remote control to select “Basic” and then press h.

PRESET/CH	PRESET/CH
ENTER	ENTER
A/B/C/D/E	A/B/C/D/E

Sound
Video	Test Tone
Basic	Speaker Set
NET/USB	Speaker Distance
Option	Speaker Level

4Select the desired parameters and then press h to access and adjust.

PRESET/CH

ENTER

A/B/C/D/E

OPERATION ADVANCED

English

95 En