Yamaha RX-V2700 owner manual Specifications, 146 En, Audio Section, Video Section, FM Section

SPECIFICATIONS

AUDIO SECTION

•Minimum RMS Output Power for Front, Center, Surround, Surround back

20 Hz to 20 kHz, 0.04% THD, 8 Ω	.................................... 140 W
• Dynamic Power (IHF)
8/6/4/2 Ω	170/205/265/345 W

•Maximum Useful Output Power (JEITA) [Asia, General, China and Korea models]

1 kHz, 10% THD, 8 Ω	185 W
• Maximum Output Power [U.K. and Europe models]
1 kHz, 0.7% THD, 4 Ω	200 W
• Dynamic Headroom
8 Ω	0.84 dB
• IEC Output Power [U.K. and Europe models]
1 kHz, 0.04% THD, 8 Ω	145 W
• Damping Factor (IHF)
20 Hz to 20 kHz, 8 Ω	150 or more
• Input Sensitivity/Input..................................................................Impedance	3.5 mV/47 kΩ
PHONO
CD, etc	200 mV/47 kΩ
MULTI CH INPUT	200 mV/47 kΩ
• Maximum Input Voltage
PHONO (1 kHz, 0.1% THD)	60 mV or more
CD, etc. (1 kHz, 0.5% THD)	2.4 V or more
• Rated Output Voltage/Output Impedance
OUT (REC)	200 mV/900 Ω
PRE OUT	1.0 V/1.2 kΩ
SUBWOOFER	2.0 V/1.2 kΩ
ZONE 2/ZONE 3 OUT	1.0 V/1.4 kΩ
• Headphone Jack Rated Output/Impedance
CD, etc. (1 kHz, 40 mV, 8 Ω)	150 mV/100 Ω
• Frequency Response
CD to Front L/R, Pure Direct	10 Hz to 100 kHz, +0/–3 dB
• RIAA Equalization Deviation
PHONO (20 Hz to 20 kHz)	0 ± 0.5 dB

•Total Harmonic Distortion PHONO to OUT (REC)

(20	Hz to 20 kHz, 1 V)	0.02% or less
CD, etc. to Front L/R
(20	Hz to 20 kHz, 65 W, 8 Ω)	0.04% or less

•Signal to Noise Ratio (IHF-A Network) PHONO (5 mV) to Front L/R

[Australia, U.K. and Europe models]	..................... 81 dB or more
[Other models]	86 dB or more
CD, etc. (250 mV) to Front L/R	100 dB or more
• Residual Noise (IHF-A Network)
Front L/R	150 µV or less
• Channel Separation (1 kHz/10 kHz)
PHONO (shortened) to Front L/R	60 dB/55 dB or more
CD, etc.
(5.1 kΩ shortened) to Front L/R	60 dB/45 dB or more

• Tone Control (Front L/R)
BASS Boost/Cut	±6 dB/50 Hz
BASS Turnover Frequency	125/350/500 Hz
TREBLE Boost/Cut	±6 dB/20 kHz
TREBLE Turnover Frequency	2.5/3.5/8.0 kHz
• Zone 2/Zone 3 Tone Control (Front L/R)
BASS Boost/Cut	±10 dB/100 Hz
BASS Turnover Frequency	450 Hz
TREBLE Boost/Cut	±10 dB/10 kHz
TREBLE Turnover Frequency	2.0 kHz
• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround, Surround back)	12 dB/oct.
L.P.F. (Subwoofer)	24 dB/oct.

VIDEO SECTION

• Video Format [MONITOR OUT] (Wall Paper)
[U.S.A., Canada, General and Korea models]		NTSC/PAL
[U.K., Europe, Australia, Asia and China models] ....		PAL/NTSC
• Video Format (Video Conversion)		NTSC/PAL
• Signal Level		1 Vp-p/75 Ω
Composite
S-video	1 Vp-p/75 Ω (Y), 0.286 Vp-p/75 Ω (C)
Component	1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)
• Maximum Input Level (Video Conversion Off)
...............................................................................	1.5 Vp-p or more
• Signal to Noise Ratio (Video Conversion Off)
....................................................................................		60 dB or more
• Frequency Response (MONITOR OUT)
Component (Video Conversion Off)
.............................................................	5 Hz to 100 MHz, ±3 dB
• Video Format [ZONE OUT] (Gray Back)
[U.S.A., Canada, General and Korea models]		NTSC
[U.K., Europe, Australia, Asia and China models]		PAL

FM SECTION

• Tuning Range
[U.S.A. and Canada models]	87.5 to 107.9 MHz
[Asia and General models]	87.5/87.50 to 108.0/108.00 MHz
[Other models]	87.50 to 108.00 MHz
• 50 dB Quieting Sensitivity (IHF)
Mono/Stereo	2.0/25 µV (17.3/39.2 dBf)
• Usable Sensitivity (IHF)	1.0 µV (11.2 dBf)
• Selectivity (400 kHz)	70 dB
• Signal to Noise Ratio (IHF)
Mono/Stereo	76 dB/70 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo	0.2/0.3%
• Stereo Separation (1 kHz)
Stereo	42 dB
• Frequency Response
Stereo	20 Hz to 15 kHz, +0.5, –2 dB
• Antenna Input (unbalanced)	75 Ω

146 En