Yamaha RX-V2700 owner manual 83 En, Stereo program parameter descriptions

	GRAPHIC USER INTERFACE (GUI) SCREEN
Sound field parameter	Features
Rev. Level	Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the
	stronger the reverberation becomes.
	Control range: 0 to 100%

Level	Source sound
	Rev. Level
	Time

Dialogue Lift	Dialogue lift. Adjusts the height of the front and center channel sounds by assigning some of the
	front and center channel elements to the presence speakers. The larger the parameter, the higher
	the position of the front and center channel sound.
	Choices: 0, 1, 2, 3, 4, 5

■Stereo program parameter descriptions

Sound field parameter	Features
2ch Stereo	2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo
Direct	sound when playing 2-channel analog sources.
	Choices: Auto, Off

y

•Select “Auto” to bypass the decoders, DSP processors and the tone control circuitry only when “BASS” and “TREBLE” are set to 0 dB (see page 52).

•Select “Off” not to bypass the decoders, DSP processors and the tone control circuitry when “BASS” and “TREBLE” are set to 0 dB.

•When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2 channels and output from the front left and right speakers.

•The low-frequency signals input from the front left and right speakers are redirected to the subwoofer in the following cases:

–“Bass Out” is set to “Both” (see page 98).

–“Front” is set to “Small” (see page 96) and “Bass Out” is set to “SWFR” (see page 98).

7ch Stereo	7-channel stereo center, surround left, surround right, surround back, presence left and presence right
Center Level	levels. Adjusts the volume level of each channel in the 7-channel stereo mode.
Surround L Level
Surround R Level	Control range: 0 to 100%
Sur. Back Level
Presence L Level
Presence R Level

OPERATION ADVANCED

English

83 En