CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

Other components, as they may cause damage and/or discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.

6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7Do not plug in this unit to a wall outlet until all connections are complete.

8Do not operate this unit upside-down. It may overheat, possibly causing damage.

9Do not use force on switches, knobs and/or cords.

10When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13To prevent damage by lightning, keep the power cord and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.

14Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.

15When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

16Install this unit near the AC outlet and where the AC power plug can be reached easily.

17Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that this unit is faulty.

18Before moving this unit, press MASTER ON/OFF to release it outward to the OFF position to turn off this unit, the main room, Zone 2 and Zone 3 and then disconnect the AC power plug from the AC wall outlet.

19VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are as follows:

.....................................AC 110/120/220/230–240 V, 50/60 Hz

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by MASTER ON/OFF. In this state, this unit is designed to consume a very small quantity of power.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.

Note

The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

Special Instructions for U.K. Model

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth terminal of the three pin plug.

This symbol mark is according to the

EU directive 2002/96/EC.

This symbol mark means that electrical and electronic equipment, at their end- of-life, should be disposed of separately from your household waste.

Please act according to your local rules and do not dispose of your old products with your normal household waste.

Page 2
Image 2
Yamaha RX-V2700 owner manual For U.K. customers, Special Instructions for U.K. Model

RX-V2700 specifications

The Yamaha RX-V2700 is a powerful and versatile AV receiver that is designed to deliver high-quality audio and video performance for home theater enthusiasts. With its robust features and advanced technologies, the RX-V2700 aims to enhance the overall entertainment experience.

One of the standout features of the RX-V2700 is its support for high-definition audio formats. It is equipped with decoding capabilities for Dolby TrueHD and DTS-HD Master Audio, which allows users to enjoy lossless audio quality from Blu-ray discs and other high-definition media. This, combined with a 7.1-channel surround sound system, creates an immersive listening experience that brings movies, music, and games to life.

The RX-V2700 also features YPAO (Yamaha Parametric room Acoustic Optimizer), a sophisticated room calibration technology. This system automatically analyzes the acoustics of the room and adjusts the settings of the receiver to achieve optimal sound performance. This ensures that users experience the best possible audio quality regardless of their room’s size or shape.

In terms of connectivity, the RX-V2700 provides a wide range of options. It includes multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports HDMI version 1.3, which allows for higher bandwidth and additional features such as Deep Color and x.v.Color for enhanced video quality.

For video processing, the RX-V2700 is equipped with a high-quality video upscaling feature. It can upscale standard definition video sources to 1080p, ensuring that all content looks great on modern HD displays. The receiver also supports Picture-in-Picture functionality, enabling users to watch multiple sources simultaneously.

Another notable characteristic of the RX-V2700 is its sleek design, which fits seamlessly into any home entertainment setup. The front panel offers a user-friendly interface, making it easy to navigate through settings and options.

The Yamaha RX-V2700 stands out with its combination of advanced audio and video technologies, ensuring it can enhance any home theater setup. Whether for movie nights, music listening, or gaming sessions, the RX-V2700 delivers an impressive audio-visual performance that caters to the needs of discerning users. With its variety of features, it remains a popular choice for those seeking a comprehensive AV receiver solution.