Yamaha RX-V2700 owner manual Manual Setup NET/USB, 100 En, Speaker Level Speaker level

GRAPHIC USER INTERFACE (GUI) SCREEN

■Speaker Level (Speaker level)

Use this feature to manually balance the speaker levels between the front left or surround left speakers and each speaker selected in “SPEAKER SET” (see page 96).

Speaker Set	Presence R
Speaker Distance	Subwoofer
Speaker Level	Front L
	Front R
	Center

Manual Setup (NET/USB)

Use this menu to adjust the network and USB system parameters.

Video
Basic
NET/USB	Network
Option	Play Style
	Information

Control range: –10.0 dB to +10.0 dB Initial setting:

Front L/Front R/Presence L/Presence R/ Subwoofer: 0.0 dB

Center/Surround L/Surround R/Surround Back L/ Surround Back R: –1.0 dB

Control step: 0.5 dB

•Select “Front L” to adjust the balance of the front left speaker.

•Select “Front R” to adjust the balance of the front right speaker.

•Select “Center” to adjust the balance of the center speaker.

•Select “Surround L” to adjust the balance of the surround left speaker.

•Select “Surround R” to adjust the balance of the surround right speaker.

•Select “Surround Back L” to adjust the balance of the surround back left speaker.

•Select “Surround Back R” to adjust the balance of the surround back right speaker.

•Select “Presence L” to adjust the balance of the presence left speaker.

•Select “Presence R” to adjust the balance of the presence right speaker.

•Select “Subwoofer” to adjust the balance of the subwoofer.

Notes

•You cannot adjust the level of channels set to “None” in Speaker Set.

•If you are only using one surround back speaker, connect it to the SURROUND BACK (SINGLE) jack, and adjust the balance in “Surround Back L”.

■Network (Network settings)

Use this feature to view the network parameters (IP address, etc.) or to change them manually.

Network	DHCP
Play Style	IP Address
Information	Subnet Mask

Note

The above display is an example.

DHCP (DHCP setting)

When this parameter is set to “ON”, network parameters for “IP Address”, “Subnet Mask”, “Default Gateway”, “DNS Server (P)” and “DNS Server (S)” obtained from a DHCP enabled router are displayed. If DHCP server function is not available, set this parameter to “Off” to configure the network parameters manually.

Choices: On, Off

IP Address (IP address)

Use this parameter to specify an IP address assigned to this unit. This value must not duplicate the one used for other devices in the target network.

Subnet Mask (Subnet mask)

Use this parameter to specify the subnet mask value assigned to this unit.

y

For most of the cases, the subnet mask value can be set as “255.255.255.0”.

Default Gateway (Default gateway)

Use this parameter to specify the IP address of the default gateway.

100 En