Yamaha RX-V2700 owner manual Manual Setup Sound, 88 En, Multi CH Assign Multi channel assignment

GRAPHIC USER INTERFACE (GUI) SCREEN

■Multi CH Assign

(Multi channel assignment)

Use this feature to set the direction of the signals input into the center, subwoofer and surround channels when a source component is connected to the MULTI CH INPUT jacks. If you input 8-channel signals from an external decoder, use this feature to select jacks for the additional front signals.

Volume Trim
Rename
Multi CH Assign	Input Channels
BGV	Front Input

Manual Setup (Sound)

Use this menu to adjust the sound parameters.

1Set the operation mode selector to AMP and then press SET MENU on the remote control.

AMP
	SET MENU
SOURCE	MENU
TV	SRCH MODE

2Press k / n on the remote control to select “Manual Setup” and then press h.

Input Channels (Input channels)

This setting is used to select the number of channels input from an external decoder.

PRESET/CH

ENTER

PRESET/CH

ENTER

Choices: 6ch, 8ch

Note

If “Zone2 Amplifier” (page 104) is set to “INT:[SP1]”, “INT:[SP2]” or “INT:Both”, no sound is output from the surround back speakers even if you select “8ch”. In this case, select “6ch” and set the output setting of the external component to 6 channels.

Front Input (Front input)

If you selected “8ch” in Input Channels, you can select analog jacks at which front signals from an external decoder will be input.

Choices: DVD, DTV, CBL/SAT, VCR1, DVR/VCR2, V-AUX, CD, CD-R, MD/TAPE

■BGV (Back ground video)

Use this feature to select the video source played in the background of the sources input from the MULTI CH INPUT jacks.

Rename	DVR/VCR 2
Multi CH Assign	V-AUX
BGV	Last
	Off

Choices: DVD, DTV, CBL/SAT, VCR 1, DVR/VCR 2, V-AUX, Last, Off

•Select “Last” to set this unit to automatically select the last selected video source as the background video source.

•Select “Off” to set this unit not to play the video source in the background.

A/B/C/D/E

A/B/C/D/E

3Press k / n / l / h on the remote control to select “Sound” and then press h.

PRESET/CH	PRESET/CH
ENTER	ENTER
A/B/C/D/E	A/B/C/D/E

	LFE Level
	Dynamic Range
Sound	Parametric EQ
Video	Tone Control
Basic	Audio Option

4Select the desired parameters and then press h to access and adjust.

PRESET/CH

ENTER

A/B/C/D/E

88 En