Yamaha RX-V2700 Adjusting the speaker level, Enjoying multi-channel sources in 2-channel stereo

Adjusting the speaker level

You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks.

Note

This operation will override the level adjustments made in “Auto Setup” (see page 35) and “Speaker Level” (see page 100).

1Set the operation mode selector to AMP and then press LEVEL on the remote control repeatedly to select the speaker you want to adjust.

AMP

LEVEL

SOURCE

TITLE

TV

Display	Adjusted speaker
FRONT L	Front left speaker
CENTER	Center speaker
FRONT R	Front right speaker
SUR. R	Surround right speaker
SB R	Surround back right speaker
SB L	Surround back left speaker
SUR. L	Surround left speaker
SWFR	Subwoofer
PRNS L	Presence left speaker
PRNS R	Presence right speaker

y

•Once you press LEVEL on the remote control, you can also select the speaker by pressing k / n.

•Instead of “SB R” and “SB L”, “SB” is displayed if “Surround Back” is set to either “Small x1” or “Large x1” (see page 97).

USING AUDIO FEATURES

Enjoying multi-channel sources in 2-channel stereo

You can mix down multi-channel sources to 2 channels and enjoy playback in 2-channel stereo.

Set the operation mode to AMP and then press STEREO on the remote control repeatedly to select “2ch Stereo”.

AMP

STEREO

SOURCE

5

TV

2ch Stereo

y

•You can use a subwoofer with this program when “Bass Out” is set to “SWFR” or “Both” (see page 98).

•You can also select the “2ch Stereo” mode by rotating the PROGRAM selector on the front panel.

•You can also select the “2ch Stereo” mode and adjust the parameter by using GUI screen. See page 79 for details.

OPERATION BASIC

2Press l / h on the remote control to adjust the speaker output level.

•Press h to increase the value.

•Press l to decrease the value.

Control range: –10 dB to +10 dB

PRESET/CH

ENTER

A/B/C/D/E

English

53 En