Nikon CP4200 manual Ensure the cover is closed firmly, Replacing Batteries, Read Battery Warnings

Battery latch

The orange battery latch is pushed aside as the battery is inserted. The latch will close when the battery is fully inserted.

First Steps

3 Close the battery-chamber cover Close the cover () and slide it in until it latches ().

Ensure the cover is closed firmly.

Replacing Batteries

Turn the camera off and make sure that the power-on lamp has gone out before opening the battery-chamber cover.

Slide the battery latch in the direction indicated to eject the bat- tery, which can then be removed using your fingers.

• Note that the battery may become hot during use. Observe due cau- tion when removing the battery.

Read Battery Warnings

Read and follow the battery warnings and cautions on pages i - ii and page 128 of this manual, together with any warnings and instructions supplied by the battery manufac- turer.

Alternative Power Sources

To power the camera continuously for extended periods, use an optional EH-62A AC adapter kit. Do not, under any circumstances, use another make or model of AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera.

For more information on attaching instructions for EH-62A AC adapter kit, see “Con- necting the EH-62A AC Adapter Kit” ( 124).

9