Nikon CP4200 When the power-on lamp is Camera is, Power-On Lamp, Auto Power Off Standby Mode

The Button

The camera can also be turned on by pressing the button for about two seconds. Your most recent picture will be displayed in the monitor ( 53).

The Power-On Lamp

The power-on lamp indicates the following:

When the power-on lamp is	The camera is
On	On
Blinking	In standby mode
Off	Off

Auto Power Off (Standby Mode)

If no operations are performed for one minute (default setting), the monitor will turn off automatically and the camera will enter standby mode to reduce the drain on the battery. While the camera is in standby mode, the power-on lamp will blink. If no op- erations are performed for three minutes after the camera enters standby mode, the power will turn off automatically and the power-on lamp will go out. The camera will be reactivated from standby mode when you:

•Press the power switch

•Press the shutter-release button halfway

•Press the button to view the last picture taken

•Press the MENU button to display the menu for the current mode

•Rotate the mode dial to select a new mode

The length of time before the camera enters standby mode can be changed using the Auto off option in the setup menu ( 119). However, when a menu or the setup menu is displayed, the monitor will turn off after three minutes, and when pictures are being shown in a non-stop slide show ( 97) or when the camera is powered by an AC adapter kit, the monitor will turn off after thirty minutes.

When connecting the camera to a computer or printer with a USB cable, Auto power off function does not work.

First Steps

13