180
n
Shooting (All Modes)
Camera takes time to turn on: Delete files or folders.
Shutter-release disabled:
Memory card is locked, full, or not inserted (020, 22, 26).
Built-in flash is charging (029).
Camera is not in focus (028).
CPU lens with aperture ring attached but aperture not locked at highest f-number (0157).
Non-CPU lens is attached but camera is not in mode M (0159).
Final photo is larger than area shown in viewfinder: Viewfinder horizontal and vertical frame coverage
is approximately 95%.
Photos are out of focus:
AF-S or AF-I lens is not attached: use AF-S or AF-I lens or focus manually.
Camera unable to focus using autofocus: use manual focus or focus lock (046, 48).
Camera is in manual focus mode: focus manually (048).
Focus does not lock when shutter-release button is pressed halfway: Use AE-L/AF-L button to lock focus
when AF-C focus mode is selected or when photographing moving subjects in AF-A mode.
Can not select focus point:
eAuto-area selected for AF-area mode: choose another mode (044).
Press shutter-release button halfway to turn monitor off or activate exposure meters (026).
Can not select AF-area mode: Manual focus selected (042).
Image size can not be changed: Image quality set to NEF (RAW) or NEF (RAW)+JPEG basic (051).
Camera is slow to record photos: Turn noise reduction off (0122).
Randomly-spaced bright pixels (“noise”) appear in photos:
Choose lower ISO sensitivity or turn noise reduction on (0122).
Shutter speed is slower than 8s: use noise reduction (0122).
AF-assist illuminator does not light:
Camera is in l or m mode (030): select another mode.
AF-assist lamp does not light for continuous-servo autofocus. Choose AF-S. In single-point,
dynamic-area, or 3D-tracking AF, select center focus point (046).
Off selected for AF-assist (0122).
Illuminator has turned off automatically.
Illuminator may become hot with continued use;
wait for lamp to cool down.