OptionDescription

At the default setting of [Sub-command dial], aperture can only be adjusted with the sub-command dial (or with the main command dial if [On] is selected for [Change main/ sub]). If [Aperture ring] is selected, aperture can only be adjusted with the lens aperture ring and the camera aperture

Aperture display will show aperture in increments of 1 EV (aperture for setting type G lenses is still set using the sub-command dial). If

Menus

[Aperture ring] is selected and a CPU lens with an aperture ring is attached when the mode dial is rotated to a, live view will not start and the shutter release will be disabled. Note that regardless of the setting chosen, the aperture ring must be used to adjust aperture when a non-CPU lens is attached.

At the default setting of [Off], the multi selector is used to choose the picture displayed during full-frame playback, highlight thumbnails, and navigate menus. If [On] is selected, the main command dial can be used to choose the picture displayed during full-frame playback, move the cursor left or right during thumbnail playback, and move the menu

and

highlight bar up or down. The sub-command dial is used to

playback display additional photo information in full-frame playback and to move the cursor up or down during thumbnail

playback. While menus are displayed, rotating the sub- command dial right displays the sub-menu for the selected option, while rotating it left displays the previous menu. To make a selection, press 2, the center of the multi selector, or J.

DLive View

When using a CPU lens equipped with an aperture ring in live view, select [Sub-command dial] for [Aperture setting].

U

342