The D3X is equipped with a ten-pin remote terminal for remote control and automatic photography. The terminal is provided with a cap, which protects the contacts when the terminal is not in use. The following

accessories can be used (all lengths are approximate):

•Remote Cord MC-22: Remote shutter release with blue, yellow, and black terminals for connection to a remote shutter-

triggering device, allowing control via sound or electronic signals (length 1 m /3 ft. 3 in.).

Remote • Remote Cord MC-30: Remote shutter release; can be used to

terminal reduce camera shake or keep the shutter open during a time accessories exposure (length 80 cm /2 ft. 7 in.).

•Remote Cord MC-36: Remote shutter release; can be used for interval timer photography or to reduce camera shake or keep the shutter open during a time exposure. Equipped with back-lit control panel, shutter-release lock for use in bulb photography, and timer that beeps at one-second intervals (length 85 cm /2 ft. 9 in.).

•Extension Cord MC-21: Can be connected to ML-3 or MC-series 20, 22, 23, 25, 30, or 36. Only one MC-21 can be used at a time (length 3 m /9 ft. 10 in.).

•Connecting Cord MC-23: Connects two cameras for simultaneous operation (length 40 cm /1 ft. 4 in.).

n

392