5 Close the clock battery chamber.

Slide the clock battery chamber cover towards the back of the main battery chamber until it clicks into place.

6Replace the main battery.

Reinsert the EN-EL4a.

7Set the camera clock.

Set the camera to the current date and time (pg. 40). Until the date and time have been set, the Bicon will flash in the top control panel.

ACAUTION

Use only CR1616 lithium batteries. Using another type of battery could cause an explosion. Dispose of used batteries as directed.

D Inserting the Clock Battery

 

n

Insert the clock battery in the correct orientation. Inserting the battery

 

incorrectly could not only prevent the clock from functioning but could

 

damage the camera.

 

399