Nikon D70SBODY manual 200, Set Playback fldr to All

Reset switch

Technical Notes—Troubleshooting

Indicator
	Control
Monitor	panel	Problem		Solution
		• Error accessing memory		• Use Nikon-approved card.	192
		card.		• Check that contacts are	2,
				clean. If card is damaged,	20
THIS CARD				contact retailer or Nikon
CANNOT BE	(blinks)			representative.
USED		• Unable to create	new	• Delete files or insert new	20,
		folder		memory card.	24
		• Card has not been	for-	• Format memory card.	21
		matted for use in D70S.
FOLDER		• Memory card contains no		• Insert another card.	20
CONTAINS		images.
NO IMAGES		• Current folder is empty.		• Set Playback fldr to All.	126
ALL IMAGES				Set Playback fldr to All or
		All photos in current folder		use Hide image to reveal 126,
HIDDEN		are hidden.		hidden photos.	129
FILE DOES		File has been created or
NOT		modified using a computer		Delete file or reformat 21,
CONTAIN		or different make of cam-		memory card.	124
IMAGE DATA		era, or file is corrupt.

A Note on Electronically-Controlled Cameras

In extremely rare instances, unusual characters may appear in the control panel and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, and turn the camera on again, or, if you are using an AC adapter (available separately), dis- connect and reconnect the adapter and turn the camera

on again. If the problem persists, press the reset switch

(see right) and then reset the camera clock to the correct

date and time (16). In the event of continued mal- function, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in loss of any data not recorded to the

memory card at the time the problem occurred. Data already recorded to the card will not be affected.

200