Nikon D70SBODY manual Flash Exposure Compensation, 102

Taking Photographs—Flash Photography

Flash Exposure Compensation

In P, S, A, and M modes, flash exposure compensation can be used to increase or reduce flash output from the level chosen by the camera’s flash control system (flash exposure compensation is not available in Digital Vari-Program modes). Flash output can be increased to make the main subject appear brighter, or reduced to prevent unwanted highlights or reflections. As a rule of thumb, positive compensation may be needed when the main subject is darker than the background, negative compensation when the main subject is brighter than the background.

Rotate the mode dial to P, S, A, or M and choose a flash sync mode as
1 described in Steps 1–4 of “Using the Built-in Speedlight” (		97–98).
Pressing the	button, rotate the sub-com-
2 mand dial and confirm flash exposure com-
pensation in the control panel or viewfinder.
Flash exposure compensation can be set to
values between	–3 EV (darker) and +1 EV

(brighter) in increments of 1/3 EV.

At values other than ±0, a icon will be displayed in the control panel and viewfinder

after you release the button. The current value for flash exposure compensation can be

confirmed by pressing the button.

3 Take a picture as instructed in Steps 5–7 of “Using the Built-in Speed- light” ( 99).

Normal flash output can be restored by setting flash exposure compensation to ±0.0 or performing a two button reset ( 111). Flash exposure compen- sation is not reset when the camera is turned off.

Using Flash Exposure Compensation with Optional Speedlights

Flash exposure compensation is also available with optional SB-800 and SB-600 Speed- lights.

9—EV Step ( 144)

This option can be used to set the increments for flash compensation to ½ EV.

102