Nikon D70SBODY manual Custom Setting 19 Flash Mode, 150, Shooting conditions

Menu Guide—Custom Settings

Custom Setting 19: Flash Mode

To choose the flash mode for the built-in Speed- light, highlight Flash mode in the detailed CSM menu ( 135) and press the multi selector to the right. Press the multi selector up or down to high- light an option, then press to the right to make a selection.

Option	Description
TTL	Output of built-in Speedlight is adjusted automatically in response to
(default)	shooting conditions.
	Menu at right will be displayed. Highlight set-
	ting between Full (full power) and 1/16 (1/16 of
	full power) and press multi selector to right to
	return to CSM menu. When mode dial is set to
Manual	P, S, A, or M, flash will fire at chosen fraction
	of full power whenever built-in Speedlight is
	raised (at full power, built-in Speedlight has GN
	[m/ft] of 17/56 [ISO 200] or 12/39 [ISO 100]).	icons blink in control
	panel and viewfinder. No monitor preflash is emitted, allowing built-in
	Speedlight to function as master flash for optional slave flash units.

Choose this option to allow camera to con- trol flash level when one or more SB-800 or SB-600 Speedlights are used for wireless flash photography in P, S, A, or M mode. Menu at right will be displayed; choose TTL (i-TTL flash control, available only with CPU lens), AA (Auto Aperture, available only

when CPU lens is used with SB-800), or M Commander (Manual). Selecting M displays menu shown

mode at right; press multi selector up or down to choose output level for wireless flash unit from values between FULL (full power) and 1/128 (1/128 of full power). Press multi se- lector to right to return to CSM menu.

*If Commander mode is selected, will not be displayed in flash sync mode icon when built-in Speedlight is raised.

150