3Select a preset.

Press the L(U) button and rotate the sub-command dial until the desired white balance preset (d-1 to d-6) is displayed in the monitor.

L(U) button Sub-command

Monitor

dial

 

4 Select direct measurement mode.

 

Release the L(U) button briefly

 

and then press the button until the

 

Licon in the monitor starts to flash.

 

A spot white balance target (r) will

 

be displayed at the selected focus

 

point.

Monitor

5Position the target over a white or grey area. While Lflashes in the display, use

the multi selector to position the r over a white or grey area of the subject. To zoom the area around the target in for more precise positioning, press the X(T) button.

125