Write-protect switch
GB 16
ANo Memory Card

If no memory card is inserted, the control panel and viewfinder will show S. If the camera is turned off with a charged battery and no memory card inserted, Swill be displayed in the control panel.

AThe Write Protect SwitchSD memory cards are equipped

with a write protect switch to prevent accidental loss of data. When this switch is in the “lock”

position, the memory card can not be formatted and photos can not

be deleted or recorded (a warning will be displayed in the monitor if you attempt to release the shutter). To unlock the memory card, slide the switch to the “write” position.

❚❚Detaching the Lens

Be sure the camera is off when removing or exchanging lenses. To remove the lens, press and hold the lens release button (q) while turning the lens clockwise (w). After removing the lens, replace the lens caps and camera body cap.

DCPU Lenses with Aperture Rings

In the case of CPU lenses equipped with an aperture ring (0 307), lock aperture at the minimum setting (highest f-number).

29