900,-SB 910,-SB 800-SB

700-SB

600-SB

500-SB

800-SU

R200-SB

400-SB

300-SB

Auto FP High-Speed Sync7

z

z

z

z

z

z

FV lock8

z

z

z

z

z

z

z

z

AF-assist for multi-area AF

z

z

z

z9

Red-eye reduction

z

z

z

z

z

Camera modeling illumination

z

z

z

z

z

z

Camera flash mode selection

z

z

z

Camera flash unit firmware update

z10

z

z

z

1Not available with spot metering.2 Can also be selected with flash unit.

3 AA/A mode selection performed on flash unit using custom settings. Unless lens data have been provided using the Non-CPU lens data option in the setup menu, “A” will be selected when a non-CPU lens is used.

4 Can only be selected with camera.5 Available only during close-up photography.

6 Unless lens data have been provided using the Non-CPU lens data option in the setup menu, non-TTL auto (A) is used with non-CPU lenses, regardless of mode selected with flash unit.

7 Available only in i-TTL, AA, A, GN, and M flash-control modes.8 Availalbe only in i-TTL, AA, and A flash-control modes.9 Available only in commander mode.

10 Firmware updates for the SB-910 and SB-900 can be performed from the camera.

AUsing FV Lock with Optional Flash Units

FV lock (0 153) is available with optional flash units in TTL and (where supported) monitor pre-flash AA and monitor pre-flash A flash control modes. Note that when Advanced Wireless Lighting is used to control remote flash units, you will need to set the flash control mode for the master or at least one remote group to TTL or AA.

314