Memory card access lamp

3Start shooting.

Highlight Start and press J. The first series of shots will be taken at the specified starting time, or after about 3 s if Now was selected for Start options in Step 2. Shooting will continue at the selected interval until all shots have been taken.

ADuring Shooting

During interval timer photography, the memory card access lamp will flash. Immediately before the next shooting interval begins, the shutter speed display

will show the number of intervals remaining, and the aperture display will show the number of shots remaining in the current

interval. At other times, the number of intervals remaining and the number of shots in each interval can be viewed by pressing

the shutter-release button halfway (once the button is released, the shutter speed and aperture will be displayed until the standby timer expires).

Settings can be adjusted, the menus used, and pictures played back while interval timer photography is in progress. The monitor will turn off automatically about four seconds before each interval. Note that changing camera settings while the interval timer is active may cause shooting to end.

ARelease Mode

Regardless of the release mode selected, the camera will take the specified number of shots at each interval.

220