![](/images/backgrounds/181715/181715-11265x1.png)
VIDEO CONTROL [Video]: Settings related to video control | Description of settings | ||
|
|
| |
INT VIDEO SG [> Video SG]: Select the test signal to be | (For | ||
output from the internal test signal generator. When SG is | *75% COLOR BARS [>> 75% bars]: 75% color bar signal | ||
selected using the VIDEO button in the video/audio input | BLACK BURST [>> BB]: Black burst signal | ||
setting section, the internal test signal generator outputs |
|
| |
| (For | ||
the selected test signal. This signal can be recorded. | |||
*100% COLOR BARS [>> 100% bars]: 100% color bar signal | |||
|
| ||
|
| 75% COLOR BARS [>> 75% bars]: 75% color bar signal | |
|
| BLACK BURST [>> BB]: Black burst signal | |
|
| ||
*FORCED STD [>> STD]: The STD mode is always used | |||
mode in accordance with the composite video or | (forced STD mode). | ||
input. | FORCED | ||
|
| the input video signal is unstable (forced | |
|
| mode). | |
|
| ||
OUT REF SEL [> Out Ref]: Select the reference video signal | *REF VIDEO [>> REF]: Use the signal input to a REF. VIDEO | ||
to use. | IN connector as the reference video signal. The input | ||
|
| video signal to be edited is required to be in | |
|
| synchronization with the reference video signal. | |
|
| INPUT VIDEO [>> INPUT]: Use the input video signal | |
|
| selected with the VIDEO button in the video/audio input | |
|
| setting section. | |
|
| ||
(For | *OFF [>> OFF]: Do not remove black setup. | ||
SETUP REMOVE [> Setup rmv]: Determine whether or not to | ON (REMOVE) [>> ON]: Remove black setup. | ||
remove black setup (7.5 IRE) from input analog video |
| ||
signals when converting them into digital signals. |
| ||
|
| ||
(For | *OFF [>> OFF]: Do not add black setup. | ||
SETUP ADD [> Setup add]: Determine whether or not to add | ON (ADD) [>> ON]: Add black setup. | ||
black setup to analog video output signals. |
| ||
|
| ||
(For | *OFF [>> OFF]: Do not mute. | ||
CC(F1) BLANK [> CC1 blank]: Select whether to mute the | ON [>> ON]: Mute. | ||
closed caption signal to be superimposed on the 1st field |
| ||
of the output video signal. |
| ||
|
| ||
(For | *OFF [>> OFF]: Do not mute. | ||
CC(F2) BLANK [> CC2 blank]: Select whether to mute the | ON [>> ON]: Mute. | ||
closed caption signal to be superimposed on the 2nd field |
| ||
of the output video signal. |
| ||
|
| ||
WIDE MODE [> Wide mode]: Determine whether to retain | *AUTO [>> Auto]: When video being recorded or played back | ||
is accompanied by | |||
being recorded or played back. | retain the information. | ||
|
| OFF [>> OFF]: Ignore | |
|
| ON [>> ON]: Whenever recording or playing back video, retain | |
|
| ||
|
| ||
ESR MODE [> ESR mode]: Select whether to enable the edge | *OFF [>> OFF]: Do not enable. | ||
subcarrier reducer (ESR). | ON [>> ON]: Enable. | ||
|
| When playing back a composite signal, set this to ON. | |
|
|
|
Settings Menu 4 Chapter
Menu Contents 65