Nikon DSR-1500A, DSR-1500AP High-Speedand Low, Speed Search—Quickly, and Accurately, Determining Editing, Points, Search Operations via External Equipment

High-Speed and Low-

Speed Search—Quickly

and Accurately

Determining Editing

Points

Use the search function to easily locate the desired scene and to quickly and accurately determine edit points.

When F. FWD/REW under the AUTO EE SELECT menu item (see page 60) is set to PB (factory default setting), you can use the F FWD and REW buttons on this unit or external equipment for high-speed search.

Search Operations via External Equipment

You can control the unit in the following operation modes from an editing control unit connected to the REMOTE connector on the rear panel, a SIRCS-compatible remote control unit such as the DSRM-10 connected to the CONTROL S connector (on the front panel), or control equipment connected to the i.DV IN/OUT connector. Shuttle: Use this mode to view color video playback at

speeds ranging from 0 to 60 times normal speed in both directions.

Note

When controlling the unit from the DSRM-10 for shuttle-mode search, the maximum search speed is 16 times normal speed in both directions.

Jog: Use this mode for low-speed search and frame-by- frame search.

Digital slow: Use this mode for noise-free color video playback at speeds ranging from 0 to 1/2 times normal speed in both directions.

Still: Use this mode to view a still picture of any field.

Jog audio: Use this mode to monitor the audio at speeds ranging from 1 to 1/30 times normal speed in both directions.

Note

When controlling this unit from external equipment, set the REMOTE I/F menu item (see page 68) and the LOCAL/REMOTE switch so that the remote mode indicators in the display section are on or off as follows.

•When using an editing control unit connected to the REMOTE connector:

Switch/menu item	Setting
LOCAL/REMOTE switch	REMOTE
	(REMOTE indicator lights.)
REMOTE I/F menu item	9PIN
	(9P indicator lights.)

•When using a SIRCS-compatible remote control unit connected to the CONTROL S connector:

Switch/menu item	Setting
LOCAL/REMOTE switch	LOCAL
REMOTE I/F menu item	—

•When using equipment connected to the i.DV IN/ OUT connector:

Switch/menu item	Setting
LOCAL/REMOTE switch	REMOTE
	(REMOTE indicator lights.)
REMOTE I/F menu item	i.LINK
	(i.LINK indicator lights.)

For description on how to carry out search operations via external equipment, see the operating instructions for the equipment.

Operation Editing for Functions Convenient 3 Chapter

High-Speed and Low-Speed Search—Quickly and Accurately Determining Editing Points

51