| INPUT SELECT |
| |
SDTI/i.LINK | VIDEO | CH1 1/2 | CH2 3/4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| d CH2 3/4 button | ||
| ||||||||||
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Chapter |
|
|
|
| c CH1 1/2 button |
| ||||
|
| b VIDEO button |
| |||||||
|
|
|
|
|
|
|
|
|
| |
| a SDTI/i.LINK button |
|
|
|
| |||||
1 |
|
|
| |||||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
Overview | a SDTI/i.LINK (SDTI (QSDI) interface/i.LINK | |
selection) button | ||
| ||
| Each press of this button cycles through the following | |
| input signal selection options. |
•Digital video signal in SDTI (QSDI) format input to the SDI/SDTI (QSDI) IN connector (optional
When this is selected, use the CH1 1/2 button and CH2 3/4 button to select the required input audio signals.
Note
In this case, the phases of the selected audio signals will be about two frames ahead of the phase of the digital video signal in SDTI (QSDI) format.
•Digital video and audio signals in SDTI (QSDI) format input to the SDI/SDTI (QSDI) IN connector (optional
•Digital video and audio signals in
The selection made with this button is indicated in the INPUT signal display section (see page 15).
bVIDEO button
Each press of this button cycles through the following input video signal selection options.
•Composite video signal input to the VIDEO IN connector (optional
•
•Y, R−Y and B−Y component video signals input to the VIDEO IN connectors (optional
•SDI video signal input to the SDI/SDTI (QSDI) IN connector (optional
•Video test signal (selected with the INT VIDEO SG menu item (see page 65)) generated by the internal
signal generator
The selection made with this button is indicated by the VIDEO indicators in the INPUT signal display section (see page 14).
cCH1 1/2 (audio channel 1 or 1/2) button
Each press of this button cycles through the following input audio signal selection options for audio channel 1 (when in
(when in
•Analog audio signal input to the AUDIO IN 1/3 connector (optional
•Digital audio signal in AES/EBU format input to the AUDIO (AES/EBU) IN 1/2 connector (optional DSBK- 1501 board required)
•SDI audio signal input to the SDI/SDTI (QSDI) IN connector (optional
•Audio test signal (selected with the INT AUDIO SG menu item (see page 67) generated by the internal signal generator
The selection made with this button is indicated by the AUDIO
When analog audio is selected (optional
You can switch the audio recording mode with the REC MODE menu item (see page 66). The selection is indicated by the REC MODE display on the front panel.
dCH2 3/4 (audio channel 2 or 3/4) button
Each press of this button cycles through the following input audio signal selection options for audio channel 2 (when in
(when in
•Analog audio signal input to the AUDIO IN 2/4 connector (optional
•Digital audio signal in AES/EBU format input to the AUDIO (AES/EBU) IN 3/4 connector (optional DSBK- 1501 board required)
•SDI audio signal input to the SDI/SDTI (QSDI) IN connector (optional
•Audio test signal (selected with the INT AUDIO SG menu item (see page 67) generated by the internal signal
generator
The selection made with this button is indicated by the AUDIO
When analog audio is selected (optional
12 Location and Function of Parts