Once the camera has been connected to your computer, you can use Nikon View to browse the contents of the camera’s memory or to copy items from the camera to disk.
Note: When unplugging the cable from the camera, pull the cable from the camera while pushing the cable’s release button (located on the underside of the connector). Unplug the cable by the connector, not by pulling directly on the cable itself.
✔Caution: Do not use the camera with a computer when battery power is low or critical. If the battery indicator in the control panel shows low or critical when the camera is connected to a computer, wait for the data transfer icon to stop flashing, then disconnect the camera and replace the batteries.
Nikon View 900: Connecting the Camera to a Computer | 27 |
